Plasma Wall Mounts

Flat screen televisions are the newest and hottest technology in the television, and they offer several advantages over standard tube televisions. One of these advantages is the great increase in picture quality, they also offer sleek, modern designs that fit well with any decor. Another big advantage is the fact that they are well designed for wall mounting due to its flat design and low weight.

When you begin to examine the possibility of> Wall mounting one of the first things you need to know is what they want behind the wall that you plan to cut, too, do not drill or cut into something in the process of assembly.

Once you've determined that you are sure to mount in a location of your choice, it is time to look at equipment needs for the job. Most of the flat plates that you can buy do not come with the mounting hardware necessary for wall mounting, you have to buy it separatelyfrom television. First, you need to find and buy an appropriate wall bracket, you should be able to check whether your owner's manual to determine a suitable bracket for your TV. The majority of flat-panel TV models come with several brackets that follow the standards of VESA compatible. The models have the word VESA, which are then followed by a number that shows the one-millimeter distance between the mounting holes on the brackets or the TV. An exampleThis would be a VESA 75, which means that the four holes on the bracket are separated by 75 mm apart, there are some brackets that form a rectangle and a VESA number as 100/200, which indicates that, on both sides of the rectangle, the holes are separated by 100 mm and the other two of 200mm.

Next on the list is important to ensure that the bracket is the screen size of your flat-panel, and to double check that the weightAbility can hold the weight of the TV. It is also important to consider what you are doing the bracket that would swivel as to avoid glare or for a better view from a different place in space, such as. You may need the TV a little after assembly to ensure that your view is exactly how you want to push.

The assembly is an ideal, if the TV screen at about eye level seating, you should also be aware of the blinding light reflection, reducing the Quality of your point of view, so be aware of these things, in the assembly.

Another aspect of the assembly is the placement of power and A / V cable. There are ways to do this quickly and the way that are more labor intensive. You can run the wires inside the wall if you want, but this is the labor-intensive. Other options for the wiring that the In-Wall work is the use of paintable cable raceways, which you can attach to avoid> Wall, or you can check to cover the laying of cables under baseboard molding, or if you have more distance. Each of these options is the intersection of ugliness, with the tangled mess of cables and wires, which are often visible between the TV and entertainment cabinet connected.

Once you have determined the route and duration of the wiring you need, how much value the wiring you need. As in any situation it is better to have too much than too little, according tois an example:

Running wire from the receiver to the wall -3 m

Running horizontally behind the wall -7 m

Running perpendicular to the TV in the wall ft -5

Wire for the wall to TV distance (with a slight excess) -2 m

Sum of all measures, -18 m, by a 15% error factor gives you are about 21ft necessary to properly do the job.

After this point you are basically ready to achieve, everything you do from hereis fit the two parts of the mount, which a wall and on the back of the TV together and your flat screen TV wall mounted successfully.

Vogel's is known worldwide as a provider of a variety of sources for audio and video equipment. It's hard to believe that the company started only recently, in 1973, as a small family business in the Netherlands. The first products from bird was produced to support speakers, and in recent decades, some amazing and innovative products have brought to market. Items such as LCD (Liquid Crystal Display) and plasma screen brackets, video equipmentsupport and other similar device is used not only in households but also in places like airports, railway stations, shopping centers and hospitals.

Vogel's attribute their success to their corporate values. Its goal is to bring innovative, high quality wall solutions for their customers, and produce stylish and functional elements. Vogel TV brackets are designed with the TV owner in mind, more and more people are now mounting flat screensboth for comfort and appearance. Vogel TV brackets should allow for large display, and thus maximizes the installation in an area, the visual experience. Bird's are committed to quality and to ensure that they have fully understood the needs of customers, so that each product provides complete satisfaction. The fact they realize that they reveal a competitive market that they are aware of the need for their products stand out extraordinary. The fact that Vogel TV brackets are so goodis known, is testimony to the fact that they are capable, for shipments to target customers and meet their needs.

Technology is advancing steadily, some of the devices we have today seems almost incredible to people from just a few generations. It seems more than likely that this progress will continue apace over the next few years. Television is a relatively new invention, and many people still remember a time when not even a single sentence, orgot their first black and white model. Until recently, almost everyone had a CRT (Cathode Ray Tube set), but they were bulky and took a lot of space and have no outstanding picture quality. Modern flat panel displays have quickly caught, and their stylish look and the fact that they are posted on the wall, and most people replace a CRT TVs no longer have to choose models. HD (high definition) channels already available, as well as HD-DVDs and DVD players.Games consoles always have better graphics. It is reasonable to think that in the near future the need will increase the HD-TVs.

Vogel TV brackets are designed to meet changing needs of consumers and a good quality and reliability for over 35 years available. As television continues to evolve, companies such as bird's body should continue to provide, bracket and mounting solutions for all types of situations. Modern homes are often full of gadgets - fancy radios,Be used blender, game consoles, but not usually as much as television. Finding a suitable mounting solution for the object that is important, in many cases, the center of our living area.

GetGray is a hobby produced DVD Home Theater Calibration. You can only buy them through Internet download, as there is a VIDEO_TS folder that you burn to a DVD-R. As the title implies, the DVD's primary purpose, to your digital display of the device underlying gray scale using a color measuring instrument such as the ColorVision Spyder2 or Gretag Macbeth Eye One Track Pro.

GetGray has some reservations. First, there may only be used (alone, without using additional calibrationDiscs like Avia Guide to Home Theater and Digital Video Essentials) with digital displays such as LCD, DLP, LCoS, etc. It is not the correct test rate monitors to CRT monitors (and old tube TV and / or high-end Front-projectors), such as needle pulse and flowering pattern. Secondly, because the Internet can download a DVD is no color filter for a base color rating. The disc is also the author assumes that you already have a calibration disc with the included filters and even offers aPhotography offer to buy your own filter. Animated De-interlacing tests are the last big gap (which I do not like this de-interlacing torture tests, they show only short coming of your DVD player so that you feel bad about your investment, while your very You probably will not become one of the shortcomings in Lake real entertainment only viewing). (Plus, it is often the source DVD's fault. Last week we rented Curb Your Enthusiasm, and it has a massive distraction jaggies in all backgrounds, Ibelieve, a short coming of the source video resolution.) (Despite this aversion to the 3:2-2:2-bad-edit-low-frame-rate-anime-Euro PAL test revealed DVDs, I check the "Special Interest" shelf every time I check into a video store for the HQV Benchmark DVD.) Oh, and no audio reviews with the exception of a Master Control Tron face for lip-synchronization.

GetGray's main drive is to create a disc that easy to navigate, if both Avia and DVE (Avia navigation is sufficient, but in comparisonits gray patterns have slight color casts; DVE navigation is awful, it makes you the title key on your DVD remote torture). Get Gray has two levels of menus: broad categories (brightness and contrast, grayscale) and their logical pattern groups (5% Gray Ramp, 20/80% Gray Windows). Select the menu item in the test pattern loop, press the Next Chapter Last Chapter and Skip to inside the loop and click to move the menu to fall back to the main navigation. Simple.

ThisSimplicity allows me to calibrate my Sanyo PLV-Z3 again and again to 2.30 clock in the morning on Sunday night (I can not dispense with a green / yellow cast in the 90% and 100% gray window, I'm back at it again today tonight, I know the correct setting combo for flat grayscale and high contrast, the projector is invisible) with very few key presses on my universal remote control. I found the following test signals super useful and convenient:

* 5% Gray Ramp: This test image is used for setting highYou adjust contrast and brightness, so until every third to last bar of each end mixed in the last two bars. This table gives you a good idea what the gray-scale display of the device controls (such as RGB gain and offset change in the Sanyo Z3) to.

* 20/80% Gray Windows: Use this high-low loops quickly adjust the grayscale gray window controls. They are often between the two mirrors, tweaking the grayscale to perfection.

* 10% Gray Windows: After yourRGB gray scale in the ball park with the Windows 20/80, sample for every 10% increase of 0-100%, and enter them into colorimeter AVS Forum member radar spreadsheet Her gray D65 target in your target 2.2 Gamma-length.

GetGray includes a brief introduction to each set of signals plus some advice on calibration and additional sources for the blue filters and additional testing discs.

Whether you're new or experienced in order to calibrate the following statementGuides contain great tutorials / overviews of the process for the amateur or Professional (with or without software): Accucal, Smart III, ColorFacts 6 (PDF direct download).

If you should buy a digital front-projector and a Spyder2 Pro or Eye One, you definitely GetGray. It will cost an affordable price of 25, which upgrades to all 1,0 patches (current version is 1.1 NTSC, PAL is guaranteed for late beta). Show your support for calibration hobbyist little guy and get an accurate andsimple calibration.

You see the wonder that is High Definition TV, in a hundred different monitors at your local retail outlet. It can be very exciting, but confusing. To get your baby, buy it and take home with them. After a storm of unpacking and connecting the cable, you have ... an image that does not even come close to what you saw in the store. Annoyed, you finally decide to get (to the handbook of what most people would never think not to read) you will find a reference to a kind of high-definitionConnection called HDMI (High-Definition Multimedia Interface), and realize that is exactly what you want to go and bring in experience. To go back to your local dealer, you will be confronted with DVD players that Upscale, HD-DVD players, Blu-ray player, video game consoles and use dozens of other products that just this new interface. Just when you thought you understand the new HDTV, you will be frustrated by the numerous choices.

Older-style analog video connections offered by nothe combination of HDMI standard, which can pass a single cable for audio and video signals, this is the new High Definition age connection standard. If your TV supports Full HD, make sure that an HDMI cable to use for these benefits. Instead of a multitude of cords and a tangle of cables behind your TV and entertainment system, HDMI allows the best of both worlds, snaked through the combination of audio and visual into a single digital cable.

So you know what to buy andTherefore, let us briefly to HDTV resolutions and their meanings.

HDTV resolutions:

- 480i (480 interlaced lines of resolution) Also from what you observed on the normal TV known for years

- 480p (480 progressive lines of resolution) Known as SDTV, progressively scanning images from a DVD player creates a nicer, smoother image on your SDTV / HDTV

- 720p (720 progressive lines of resolution) This is your first step into HDTV. Considering the 720 lines of resolution, nearly twice as highthat of 480p, has a softer image to a high-definition TV

- 1080i (1080 lines interlaced) resolution is currently the highest resolution of satellite and cable operators offering exceptional picture quality on a TV can display 1080i

- 1080p (1080 progressive lines of resolution) as a Full HD, 1080p is known, currently "IT" on the market for best picture quality.

Now that you know the progress of the HDTV resolutions,Let's find out what all those numbers mean really on the new HDTV you just bought.

If you are selecting the cables to the HDMI-equipped devices, get in touch, these are some elements that keep an eye on.

How do you spend a good piece on the cable, make sure that you, the future proofed - even if your TV programs are not broadcast in 1080p, the latest DVD and game consoles, so a cable that is 1080p certification is received. To ensure that it transmits video andLossless audio, make sure that the cable HDMI 1.3. Many cable to make the start for more than 10 feet to lose the quality, so sure that the cable is certified for 1080p. Finally, pay attention to how tight the cable, as most versions have no type of lock, and it can wiggle loose.

That's it. Now it is time to buy an HDMI cable, so that you can enjoy the vibrant video and audio signals that you fell in love with in the business!

Many people are purchasing their first HDTV. One of the hallmarks of an HDTV is that you have many more choices when it comes to how you want to display them. Although it can be very difficult is to allow the matter of a prominent flat-screen TVs to people who use a regular stand, they mount on the wall, they fit under a cabinet, under her bed or a multitude of other places.

Wall Mount

Wall mounting a new HDTV is probably one of the hottest ways toShow your HDTV. Wandhalterungen are very practical, because they often have an arm for you to use various areas of the space angle. As more and more people will open in their open floor plans to take over, this is especially convenient. They show both the TV in your living room or kitchen and be able to see, it does not matter what you do.

Wall mounting is also allowed to set the TV people in places where they would not fit into the rule. You'll find thatMany people have an assembly-TV in the bathroom, so they can watch the morning news as they prepared for work or so they too can enjoy a movie, how they get in a nice bubble bath to relax.

Wall Mount an HDTV you need some practical skills. But with the help of a friend and by following the instructions, most homeowners were able to handle this project for themselves. If you are not the kind of craft there are many paid services that come to your home and set up your new HDTV. Thisis a great option if you depend on your very expensive TV concern on the wall.

More and more, a high-def TV will become a part of the average American home. Unfortunately, most houses are not really designed for this often large quantities, and they are easily in their way, rather than an extension of the living culture. But with creativity and a little sweat and cash equity, you will make your HD TV add value to your home.

Creative Living Room Extensions

Start with your living room, the goal for most HD TVs.> Wall mount for plasma and LCD TVs are too expensive and often difficult to place exactly right, because you have studs in strategic locations, you may find that some houses, they are at all suitable.

Instead of a wall-mounted, which can be unstable, even in the best cases, you can install a special room just for the LCD TV: a cavity in the wall designed to keep your TV at exactly the right place for a perfect view. You mustsome drywall, this right, it's a good excuse for your next step: to do your living room surround-sound wiring torn out. In non-custom setups, wiring for surround sound quality must be running on the floor, creating a danger for man and machine alike. However, if you install a good cabling from your wall or cavity on the ideal places for the surround sound stops, you hide your wiring completely, make a safer environment, and add some real value to yourHome.

Do not Forget the Bathroom

When I was a kid, I always thought that was the ultimate in luxury with a TV in the bathroom. This is feasible today than ever before. Run wiring in your bathroom on a white wall, which is suitable for your HDTV, then install your wall. If you have a properly-designed bathroom, you can sing the acoustics suitable not only for the shower, but for natural surround sound to be found, otherwise you should consider the same solutionThey used the living room.

As a final touch, put a mirror in your bathroom-screen HD TV. This clever disguises your screen LCD or plasma TV as a useful mirror, but when you turn it on, the screen is as clear as if nothing there.

The Media Room Addition

The ultimate home value today is the dedicated media room. With perfect acoustics (often with carpet) and the complete wiring and conveniently-placed wallOutlets, and LCD TV screen friendly lighting, this room is a perfect add-on or renovation.

If you plan to major home renovations in the near future and you love your HD TV, you should use one of these extensions for your home. You can, how much value they can add to your home - and even if they do not just add value not be surprised, they can ensure home sells faster if you should move into the future.

What is a receiver?

A receiver is that big, heavy thing that you plug your speakers and other components into (like a DVD player, TV, CD player, Xbox, PlayStation, iPod, etc.). It is the "brain" of the show, really. The idea of all the components to a receiver is the concept of audio / video switching, allowing you to different video sources (eg TV, DVD, camcorder) on your TV
thus changing the audio source - all without touching anything,but the recipient.

Of course, the main objective behind audio / video is switching is driving a receiver for external audio speakers, like surround sound or stereo speakers.

Most receivers have a variety of inputs, and more specifically to 8 speakers and a subwoofer (, 5,1, or five speakers and a subwoofer), multiple video inputs, and even HDMI inputs. You can plug your Xbox, Plasma, and DVD player to your receiver and use a remote control to switch between all the different video switchSources (games, TV, DVD-Video) and have your speakers pump out surround sound. Let's start with inputs and outputs. If you do not understand something, through the whole how-to, since most of them are explained in detail to read.

Remember that a receiver is the hub of the entire home theater, so this How-To actually perform the basics of connecting your complete home theater.

So what the hell is all this "stuff" on the back of the receiver?

I'm going to go overalmost everything you would find on the back of the receiver. The one I'm off base this guide is a Harman Kardon AVR-247 I'm going from the top left of the device and start my way to the right, then I start on the left, the next row and so on.

The first three inputs are for antennas. An FM antenna cable would slide on the first jack and two speaker cables into the remaining slots for AM would plug. Of course you do not have your antenna connector, but ifYou want AM / FM reception through your speakers, you want to go ahead and do it. These are standard connections, so if you lose one of your antennas, just go buy a new for a few dollars.

You've probably heard of composite video. It is a very basic video connection used the most (by a component TV, DVD, VCR, in particular). The common and cheap. As such, the very low quality.
Uses a composite RCA cable for video (yellow) and two RCA cables for audio (red and white, stereo). TheProblem is that a composite video cable combines luminance and chrominance in the same cable, so the quality of the image. You lose a lot of sharpness, and the color begins to deteriorate from the original source. Be useful if the additional input or the device that you connect only via composite video. Otherwise, use something else, like component video. Sounds similar, very different.

S-Video is the next in line after composite. It uses a different type of connector (five pinsin a circle) and gives you marginally better video quality. It's also a video-only cable, so you have to separate in the audio plug. In this case, you will probably be a few red and white RCA cables for your audio inputs.

Next up: a ton of composite audio inputs. These inputs use left channel and right channel RCA cables, red and white. They look like the yellow composite video cable, and they can also video and the yellow for audio, but we keep theColor scheme as it is;) Composite Audio is the bottom-of-the-barrel in the audio. Its perfect for most, but if you are looking for high quality surround sound, you do not want composite. Game systems like the Wii or Xbox, and very basic DVD players are the perfect complement for composite audio.

The same goes for VCRs, CD players, and everything that has only a composite audio output. Plus, if you do not have surround sound or your receiver only two channels (2.1, stereo sound), thenunable to use anything but composite audio. Note that there is a composite audio input under each composite-video input, so it is easy to match them. Plug them in the wrong one and they will no longer sound when you are on this particular video input.

Here we have one of the least-used features of a modern receiver: 6 (or 8) channel direct input. This is only used for two purposes: SACD or DVD-Audio. SACD stands for Super Audio CD. It is a proprietary audio formatdeveloped by Sony for special CDs that are recorded in 5.1 surround sound. That means you need a CD or DVD / CD player, SACD, a receiver with SACD support (as shown), and naturally supports Super Audio CD's. DVD-Audio is the same idea, different brands, different media (its a DVD, not CD!).

DVD-Audio discs are special DVDs in 5.1 surround sound can be recorded and played for them only for devices with support. These CDs go all the way up to 7.1 surround sound, which meansYou would have two front, two rear, two side speakers and a subwoofer to enjoy full 7.1 surround sound. Most receivers support up to 7.1 now, but you will not find DVDs with that kind of capability for movies. 5.1 surround is still the de facto standard, so do not run out and buy more speakers in the foreseeable future.

You can skip this next little item because it is unique to this brand of receiver (Harman Kardon). The Bridge "is a proprietary connection they developed for you to connect
oneiPod. You must buy a separate component that includes a docking station and special cables to connect to the iPod. It is fully integrated with the receiver, the display
Menus and titles on the front LCD screen of the recipient. You can easily pump your tunes through your speakers, whether stereo or surround sound.

Of course, the music on your iPod, stereo sound, so the best thing that can happen is simulated surround sound or stereo surround, the same music inthe two front channels
is provided by the rear channels and center. Some receivers of this intelligent than others, but more on that later.

Here we have our high-end sound inputs and outputs. Basically, have the same performance, you need fiber optic connections (with the quadratic form) and digital coaxial (just like a cinch) cable.
Both are digital to 100%, while Composite is analog. The only way you can truly surround sound from any source is by using one of theseConnections (or the SACD / DVD-Audio Option)

Almost all DVD players these days have either optical or coaxial digital outputs (sometimes both). Many high-definition cable and satellite boxes also come with these
Compounds, so that you can enjoy 5.1 surround sound on high-definition channels. The choice between the two there is really no different in audio quality, so feel free to use
what you want (or what you are forced to).

I do not think that I have a picture for the next plug. It is aCouple power inputs. One thing is for powering the receiver, the other for whatever you want. In this way, when you turn
on the recipient, type (power with the other device, be it a DVD player, CD player, cable box, whatever). I'm not necessarily recommend, unless it specifically suits
Your needs. It is useful if you're running low sales, of course.

Something else will you never use: D-bus RC-5 input / output. This is for infrared remote controls used to on your home theaterSystem. Frankly, not something any of us will ever use. Some of the real high-end could be junkies with something for them, but I did not even come with a device that uses this technology. Keep up on the remote that came with your device, or purchase a high quality universal remote. There is no need for this option. An alternative use for this might be a bit more common: if your receiver's front panel is locked (as in a cupboard), you can get an infrared transmitter to latch on the frontthem. This transmitter would hook up to another device anywhere in your room that accepts the signals from your remote control. The receiving device then sends the commands from the remote to the receiver (via the channel you have connected to the front over the regular infrared transmitter).

Pre-outs, is located directly under the remote in / out. Pre-outs are used when you can plan an add amplifiers to your system (to increase the power and did) so that the volume and audio quality. Average
Users are notUse it for anything other than the subwoofer preamp output. You want to deliver a subwoofer cable from the subwoofer to the subwoofer pre-run-out to
the right frequencies. This is the right way to connect the subwoofer to your surround system. The other entries will not be used if you plan on adding
an amplifier. This is highly unnecessary for home use. You can add an amplifier if you try to fill a space the size of a small house with enough sound, but you do not knowright?

Here we finally have the meat of the system: The speaker inputs! Harman Kardon receivers use bind posts for connecting speakers, as shown in the picture. They
Work on the series as it counter-clockwise, then you can sneak the speaker wire into the caps on and pull it back by turning clockwise to loosen. This will
They give a beautiful fit your speaker wire tractors, that is not likely to loosen itself over time. Other brands may use other types of connections, butbind posts are very common.
They could have been in a position to say this is a 7.1-channel receiver, as the speaker inputs.

You've got room for 2 front left and right speakers, 2 rear speakers left and right,
a center channel and two on the left and right "surround" channels which are placed on the market somewhere between the front and rear speakers (side surround, or 7.1). If you have enough
Speakers, you can go out and plug in the extra 2 side are, but they will not play any sound onall on a 5.1-DVD. You would need a DVD that supports 7.1
Surround sound, and in that time, there's simply no market for them. CDs gladly blast stereo surround through all 7 speakers, though, so for some larger rooms to Use
Advantage.

Our last set of connectors for this receiver: component video. The best video you can change the composite or S-video. They are (a series of all three cables for video communication),
normally red, green and blue. Do not think that is what theCable is doing - if it separates the video signal by luminance and two separate color channels. In the past component
there was in fact represent R, G, B (splitting the primary colors in transmit and recombining them on the target device), but that is not in the current component is video
Connections. Component video can carry high-definition signals all the way up to 1080p, then it is the most cost effective and readily available high-definition input.
Not seen on this receiverDVI and HDMI are the two all-digital video connections.

HDMI is the newest and fastest, most powerful video and audio connection available immediately. It is the cable, which produces audio and video does not mention in one - that is in high definition.
HDMI is supported by the source and the display you connect to do not use all its features. Not all DVD players, cable boxes, support or the recipient of both
Audio and video in HDMI. The more and more becoming a standard now support both.The advantage is obvious: less clutter, higher quality audio and video. You can
to 1080p high-definition video and 7.1 surround sound via an HDMI cable. Newer cable and satellite boxes, DVD players, high-definition DVD players, receivers and more expensive
supports the full capability of HDMI. It's the best you can get is like all digital.

The last link for this article is DVI. DVI is also all digital like HDMI, but it can not process audio signals. HDMI cana technically superior image,
but I think no one could tell the difference. DVI supports HD video up to 1080p, and HDMI. His being is now used less frequently,
But if you bought a new computer or video card for your PC recently, it probably has a DVI (or two) connector on it. Most computer monitors use DVI now and video cards
have followed suit. HDMI is edge its way into the PC market, but its dominance is seen in the home theaterArena.

Now that you have familiarized yourself with common connections, let's plug it all together.

This part of the recipient's How-To will walk you through hooking a 5.1 surround-sound system (5 speakers and a subwoofer) with a high-definition TV, a guide high-definition cable or satellite box, DVD player and a 5.1 receiver.

Your TV & Components

Where will you put your TV, depending on how big it is, how big your room, and where you are seated. When their 50Customs, sitting not more than 10-15 feet, but not less.
A 60 is "perfect for 12-20 feet. If you have a 32 inch set, try to sit no farther than 8-12 feet away. Your receiver, DVD player, cable and other components must, of course, close together, but are they are not physically on top of each other. They all hot, especially the receiver. If you have no choice but to push a thin piece of plywood between the components in order to dispense the heat.

Lay Out OfSpeakers

The first step is to lay out your configuration. Different rooms call for different locations for your speakers and subwoofer. If your room is a typical rectangle, go ahead and put the two front left and right speakers somewhere flush with the TV on this side of the room. Your left speaker goes toward the left corner, right speaker, right on the corner. Do not bother with speaker wire yet (unless your speakers come with speaker wire already attached, in this case onlynow let them dangle). Note that the speaker is left or right only depends on how you connect to your receiver. Your speakers are not really known as "left" or "right".

Depending on how you acquired your speakers, front speakers could be larger than the rear speakers. That's how you know that they are at the front. Otherwise, all speakers the same shape and size, and you can each use for any purpose.

One exception: the center channel. Normally a center isChannel is much shorter and wider than the other speakers. It should be used only for the center channel. Sometimes, all 5 speakers could be the same, usually on a very low-cost installation. You can use any of these speakers for a particular purpose.

Your center channel should always be either directly above or below the TV. However, you have to do it, get it done! It is not as the center channel for nothing, you know. Each film will pump almost 90% of the vote, which youhearing and the majority of the rest of the sounds through the center channel. It is a very important component to the surround-sound setup.

Your subwoofer should always be on the floor. If it is impossible to put him on the ground, they get on the floor as close as possible. Placement behind objections or in closets will diminish its effects. In a perfect setup, the subwoofer would be on the floor near the TV (perhaps the left or right) in the line of sight. Nothing shouldBlocking the side of the subwoofer that comes out of the air (usually by a grille to protect the subwoofer itself covers).

When it comes to finding a good place for your speakers, you should mount those partitions. You can usually buy speaker terminals brackets online or in stores. You can also
existing shelving, buy some shelves, or on tables or other objects. No matter how you do it, you should keep the speakers as close to ear level as possible. A spokesmanmounted on the ceiling of the room is not to give you the optimal listening experience.

The last, something to note about layout is speaker wire. Perhaps at least 100ft of speaker wire, but you will often even with a lot more if you
You try to wire through your ceiling, under carpeting, up through the basement, or around objects to conceal it. The measurements and buy at least 10% more than wire --
You think you need. You are probably usingit!

Cabling

You need different types of speaker cable are available to you to know before setting up your home theater. If you bought an HTIB (home theater) in a box, it probably came with 100ft of horribly cheap speaker wire. You do not want that! Do yourself a favor: buy some high-quality, 14-gauge speaker wire. All that is higher than 14-gauge only thin and vulnerable to interence, quality loss and poor quality over longer distances. Fourteen gauge is a goodThickness and suitable for most home theaters. Make sure not be too thick - some speaker wire simply will not fit in the speaker wire jacks on some receivers.

Some receivers use proprietary speaker inputs. Sony is an example. Many Sony receivers have special connectors for speaker wire and will not accept a standard speaker wire. You either have to use the Sony-provided speaker cable, take the ends of Sony speaker cables and put it on your own, or buy some of these specificConnectors from Sony directly to your speaker cables. My recommendation? Avoid any receivers with non-standard speaker wire number of posts / sockets / plugs. Search binding posts or other connectors that you slide in itself, and clamp down on a typical speaker cables allow.

If you've sorted out your speaker cable, you need to do some cutting and stripping, if you chose to purchase your own. This sounds harder than it sounds, so do not worry!

Measure out each length one at a time by theSpeaker wire with either really great scissors or a sharp knife. Now you need the ends of the wire strip. Use either a stripping tool, or the good old scissors. You can use the scissors on the cable in place and easily Apply Some Pressure, as you twist the scissors around the cable, cut carefully into the plastic coating. Eventually, they will be weak enough that you can just slide out by pulling on it with your fingers. You need at least 1 / 4 "of exposed wire.

Now you can can make your connectionSpeakers. Note on your speaker wire the difference between the two ends. You need to use your as a positive and a negative. Sometimes the coating in a different color between the two, or there is a text and not on the other side. Keep these - depending on which side you positive your speakers, use it positively to the receiver. Crossing the two can cause damage, either immediately or sometime in the future. It might work this way, but you do not want itto!

Connecting the speakers is easy enough. Front left to front left on your receiver, center speaker center on your receiver, etc. .. Your rear speakers can be described as "surround" or "backwards" instead of just "behind", but retain in mind when you have 7.1 or 8.1-channel receiver, "Surround" can be shown on this page, surround speakers, not rear speakers.

Subwoofer

Your subwoofer is certainly a little more complicated. There are a few different ways to do this andmany variations of inputs / outputs on the back of the subwoofer. I'm going with the most standard and efficient method for your first go.

You need a subwoofer cable for connecting your sub. If you have an account yet or do not want to buy, you can for a standard red and white RCA cables to replace (or a couple, because they are usually connected, you can hang the other cable). It works, but really not the best way to do this. You also need whats called the Y-adapter. On the back ofYour sub should) is a left / right input (red and white. You plug the Y adapter to these compounds and then the subwoofer cable (or RCA cables) to the other end of the Y (Note: if you do not have a Y adapter, just choose the left or right input to plug in).

Now take the other end of the cable and plug it into your receiver
Subwoofer preamp output. I hope you have an under-powered, it is to AC power outlet. Everything you need to do now is to plug in yourSubwoofer is good.

If you do not have RCA jacks on your subwoofer, or it only has speaker wire jacks (and) probably not powered, you must connect it to the old-fashioned way. Your front left and right speakers will ouput jacks plug into the subwoofer instead of your receiver. They will then run speaker wire from the left and right inputs on the subwoofer on the left and right speaker output on your receiver. In this way, the subwoofer is operated by the recipient and will notWork and an under-powered. Also some power away from your front speakers with this method. A good idea is to buy a new, powered subwoofer with line in RCA jacks.

Connecting the Dots

They did the hard stuff from the road. Exit Now, by adding it to your TV, DVD and cable / satellite box. Always try to get the best options first. If your DVD --
HDMI has also, and use your receiver. If you use your DVD S only via composite, S-Video and component video, componentVideo cable. When it comes to audio, you absolutely need
be used for digital coaxial (jacks usually orange) or embedded fiber optic (usually the female in the unit and has a door on it, and if the door is open, a red light is visible). If you are not one of them, you will not be true surround sound! If all else fails, resort to composite (red and white) audio connectors.

Note: close to the terminals on your receiver look. Everything is labeled as the first sentence ofRed, green and blue component video inputs can be labeled "Comp 1". If you use the composite audio-cablesfor your sound, you need to plug into the sockets to coordinate with "Comp 1. This is perhaps not by the beneficiaries clearly, so please refer to the manual of your receiver to determine which Using video inputs, audio inputs. In most cases you will be able to configure them from internal menu of the receiver with the remote.

For some receivers, all the component videoinputs, for example, are linked to a single composite audio input (usually "DVD"), so if you connect more than one of the component inputs, you will be competing for sound when more than one device is active. This is why you'd want to configure the component inputs to use different audio inputs.

Your manual is the only way to figure out how to go about it. Composite video will usually match up to composite audio inputs with naming conventions like Video 1 -> Video 1, Video 2 -> Video 2, etc., but as Component and DVI cable may not work. You should also configure digital audio inputs match the video inputs you plan on using. For example, if you are using a digital coaxial input (possibly "Digital 1"), and component video, you want to match "Digital 1" with "Comp 1". Also, see your user guide, how to do this.